Decorative panels and frames
Our beautiful decorative fretwork turns rooflights, vents, cupboard doors, surfaces and awkward spaces into talking points! Designed with van and boat life in mind, these are cut from FSC registered Birch ply, and are extremely lightweight and fully customisable to meet your size requirements.
Our pricing structure is dependent on your specific size requirements. Please enter the exact dimensions you require in the boxes below and we will send you a quote. If you are interested in our vent/rooflight frames, please see diagram below for instructions on how to provide us with measurements .
Request a quote
"*" indicates required fields
Additional information
Our fretwork is intricate and therefore delicate, so depending on the size of your panel, we may send it to you in sections (with instructions on how to install them) to minimise the risk of damage in transit. The roof vent/light frames consist of 2 layers of 3 mm ply and are supplied with screws for you to attach. All frames will come in four pieces – two pieces of patterned top layer and two pieces of the plain base layer.
Before we go ahead with your order we will send you a software mock up. Unfortunately, we are unable to offer refunds for custom made products, so please ensure you double check your measurements.
If the panels arrive slightly warped, this is normal, we recommend clamping during the gluing process. Please apply the panels with your chosen adhesive. To maximise longevity, we advise sealing the front/side surfaces of the fretwork.
The panels may may vary slightly in colour tone due to natural differences in wood grain/colouration.
